Select Page

Caterpillar C32-709 Land Driling Engine

The Caterpillar C32-709 Land Driling engine is an In-Line 6, 4-Stroke-Cycle water-cooled diesel with a 137.2 mm (5.4 in) bore, 171.4 mm (6.75 in) stroke and 32.1 L (1959 in³) displacement.

The Caterpillar C32-709 Land Driling engine is rated at 1400 RPM and rated at 709 bkW.

Caterpillar C32-709 Land Driling engine complies with EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA, air intake is turbocharged After cooling.

Caterpillar C32-709 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Caterpillar C32-709 ACERT engines to deliver excellent performance with low operating costs and emissions. This is an ideal engine for land mechanical drilling appliCaterpillarions such as mud pump drives. Caterpillar engines are backed by the worldwide network of Caterpillar dealers ready to support your operation with technical support, service, parts, and warranty. Caterpillar C32-709 ACERT™ Industrial Diesel Engine. Ratings: 709 bkW (950 BHP) @1400 RPM meet China Stage II, U.S. EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards.

As part of EMAC, Caterpillar land driling also offers high performance propulsion and handling solutions Engine, engine provides electronic control and mechanical, fuel common rail system for customers to choose, we provide full life cycle service for all customers, from design to land driling power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from Troubleshooting to Overhaul Technical Support.

Advantages of C32-709 Land Driling Engine

  1. Engine Design : Proven reliability and durability, Ability to burn a wide spectrum of gaseous fuels, Robust diesel strength design prolongs life and lowers owning and operating costs, Broad operating speed range.
  2. Advanced Digital Engine Management : ADEM A3 control system providing integrated ignition,

speed governing, protection, and controls, including detonation-sensitive variable ignition timing. ADEM A3 has improved: user interface, display system, shutdown controls, and system diagnostics.

  1. Lean Burn Engine Technology : Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Lean-burn design also provides longer component life and excellent fuel consumption.
  2. Ease of Operation : Side covers on block allow for inspection of internal components.

Technical Specifications

Basic Introduction of Caterpillar C32-709 Land Driling Engine

Engine Model:C32-709
Engine Type:Inline 6, 4-Stroke-Cycle Diesel
Displacement:32.1 L
Rated Speed:1950-2200 RPM
Aspiration Method:Turbocharged Aftercooled (TA)
Emission Standard:UN ECE R96 Stage IIIA
Bore*Storke:105 mm (4.1 in) * 135 mm (5.3 in)
Packing Size(L*W*H):1140 mm * 720 mm * 820 mm
Weight , Net Dry:507 kg (1118 lb)
Lead Time:15-30 Working Days
Payment Terms:T/T ,L/C
CAT C32-709 Land Driling Engine-788X376

Engine Model

Rated Power

Aspiration

Emissions

C7.1E205 bkW(275 BHP)@  2500 RPMTurbocharged Aftercooled (TA)Brazil MAR-1, UN ECE R96 Stage IIIA
C7.1M162 bkW(217 BHP)@ 2200 RPMTurbocharged Aftercooled (TA)China Nonroad Stage III, UN ECE R96 Stage IIIA
—-End—-

General Engine Specifications of CAT C7.1M Industrial Engine

Engine ConfigurationInline 6, 4-Stroke-CycleBore105 mm (4.1 in)
Stroke135 mm (5.3 in) Displacement7.01 L (427.7 in³)
AspirationTurbocharged Aftercooled (TA)Rotation From Flywheel EndCounterclockwise
Length1140 mm (44.9 in) Width720 mm (28.4 in)
Height820 mm (32.3 in)Weight507 kg (1118 lb)
Compression Ratio18.2:1 Combustion SystemDirect Injection
—-End—-

Engine Performance Data Rated Power of CAT C7.1M Industrial Engine

Maximum Power162 bkW (217 BHP)Maximum Torque900 N.m @ 1400 RPM (663 lb-ft @ 1400 RPM)
Rated Speed1950-2200 RPM Minimum Power112 bkW (150 BHP)
EmissionsChina Nonroad Stage III, UN ECE R96 Stage IIIAAspirationTurbocharged Aftercooled (TA)
—-End—-

System of CAT C7.1M Industrial Diesel Engine

Lube SystemWide Choice of Sumps for Different ApplicationsExhaust SystemDiesel Particulate Filter and Regeneration System Supplied, with a Range of Inlet and Outlet Options
Cooling System108 °C (226 °F) Top Tank Temperature  As Standard to Minimize Cooling Pack Size 
50:50 Water Glycol Mix, Detailed Guidance on Cooling System Design  
Validation Available to Ensure Machine Reliability   
—-End—-

Standard of CAT C7.1M Industrial Engine

Fuel System1. Fuel Transfer PumpExhuast System1. Exhuast Manifold
2. High-Pressure Fuel Pump2. Turbocharger
3. Fuel Filter3. Exhuast Elbow
Air Intake System1. Air Intake ManifoldStarting System1. Starter Motor
2. N/A2. Starter Rely
Cooling System1. Water PumpPower Output System1. Flywheel
2. Engine Fan2. Standard Flywheel Housing
3. Standard Radiator3. N/A
Lubricating System1. Oil PumpCharging System1. Charging Alternator
2. Oil Filter2. N/A
Engine Shut-Down System1. Engine Fuel Shut-Off SolenoidrEngine Mounting System1. Engine Mouting Bracket
Engine Auiliary Accessories1. Air Compressor
——END——

Optional Accessories of CAT C7.1M Industrial Engine

Air Intake System1. Air Intake Pre-HeaterExhuast System1. Muffler & Bellows
2. Air Intake Shut-Off Valve2. Flame Trap
3. Air Filter3. Spark Arrestor Type Muffler & Bellows
4. Air Intake Pre-Filter4. Dpf System
5. Air Filter Alarm System5. N/A
Fuel System1. Coarse FilterLubricating System1. Oil Pre-Heater.
2. Fuel Pre-Heater2. N/A
Starting System1. Manual Magnetic Dc ContactorCooling System1. Silent Type Radiator
2. Dual Ears Flywheel Housing2. Plateau Radiator
3. Spring Starter Motor3. Salt-Spray Resistant Radiator
4. Air Starter Motor4. Coolant Pre-Heater
5. Hydraulic Starter Motor5. Jacket Water Heater
6. Manual Magnetic Dc Contactor6. N/A
Engine Auiliary Accessories1. Hydraulic Oil PumpControl System1. Can Add Engine Monitoring System, Contro System With Wiring Harness.
2. Air Conditioner Compressor2. Can Add Self-Protection System that Integrated with Alarm System.
Power Output System1. ClutchEngine Mounting System1. Shock Absorber Pad
——END——

Modifiable Components of CAT C7.1M Industrial Engine

Air Intake System1. Installation Position of Air FilterCharging System1. 12 V Charging Alternator for 12 V Electric System
2. Upgrade to Heavy-Duty Type Air Fitler2. Explosion-Proof Charging Alternator
3. N/A3. Upgrading to Specified Brand and Speicifications of Charging Alternator
Exhuast System1. Water-Cooled Exhuast ManifoldLubricating System1. Oil Pan Position
2. Water-Cooled Turbocharger2. Number of Dipstick
3. Can Modify Installation Position and Direction of Turbocharger3. Position of Dipstick Can Choose from 6 Positions
4. N/A4. Can Modify Oil Filter to be Remote Installation
Engine Shut-Down System1. 12 V Solenoid for 12 V Electric SystemStarting System1. Upgrading to Specified Brand and Speicifications of Starter Motor
2. Explosion-Proof Solenoid2. 12 V Starter Motor for 12 V Electric System
Fuel System1. Upgrade to Fuel Fitler that Integrated with Fuel Transfer Pump and Fuel Pre-HearterEngine Auiliary Accessories1. All of auxiliary System can Choose Specified Brands and Specifications
2. N/A2. Additional Auxiliary Systems Can be Added for Special Applications
Cooling System1. Can Modify Engine fan Into Blower Fan or Suction FanPower Output System1. Can Modify Size of Flywheel Housing and Flywheel
2. Can Modify Central Position of Engine Cooling Fan2. Dual-Ear Flywheel Housing (For Twin-Starter System)
3. Can Choose Type of Engine Fan From Mechanical Type or Electric Type3. Some of Models can Modify Flywheel Housing Into PTO Integrated Type
4. N/A4. Engine Have Connecting Port of PTOs, That Able to Provide Power Output
Engine Mounting System1. Can Modify Engine Mouting Bracket
——END——

Note: All Above Data are Just for Referenece, All Data Might Change Without Notices or Update, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

WhatsApp Online logo

Sales Team


Constraction Sales - Ms. Kitty Chen

Sales Director - Mr. Jasper Lee      

Service Team


Customer Service - Mrs. Wendy Fu

Ventas españolas - Victoria

Contact EMAC Now!

13 + 2 =

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.caterpillar-engine.com

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest