Select Page

Caterpillar C7-153 Well Service Engine

The Caterpillar C7-153 Well Service engine is an I-6, 4-Stroke-Cycle diesel with a 110 mm (4.3 in) bore, 127 mm (5 in) stroke and 7.2 L (442 in³) displacement.
The Caterpillar C7-153 Well Service engine is rated at 2200 RPM and rated at 172 bkW.
Caterpillar C7-153 Well Service engine complies with EPA and CARB Non-Road Tier 3,EU Stage IIIA, EPA Marine Tier 2, IMO Tier II, air intake is turbocharged After cooling.
Producing oil and gas is a complex task that requires equipped designed specifically for the oilfield. Caterpillar C7-Series oilfield diesel generator sets offer a rugged design capable of withstanding harsh conditions in the oilfield. Decades of experience in engine manufacturing combined with the latest electronics deliver the highest performance, safe operation, low emissions, and simplified operator interface. Caterpillar generator sets are backed by the worldwide network of Caterpillar dealers ready to support your operation with technical support, service, parts, and warranty.
As part of EMAC, Caterpillar well service also offers high performance propulsion and handling solutions Engine, engine provides electronic control and mechanical, fuel common rail system for customers to choose, we provide full life cycle service for all customers, from design to well service power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from Troubleshooting to Overhaul Technical Support.

Advantages of Caterpillar C7-153 Well Service engine

  1. Engine Design : Proven reliability and durability, 45°C ambient capability*, Robust diesel strength design prolongs life and lowers owning and operating costs, Broad operating speed range.
  2. Custom Packaging : Trust a Cat factory custom package to meet your exact petroleum application needs. Cat engines, generators, enclosures, controls, radiators, transmissions — anything your project requires — can be custom designed and matched to create a one-of-a kind solution. Custom packages are globally supported and are covered by a one-year warranty after startup.
  3. Full Range of Attachments : Large variety of factory-installed engine attachments reduces packaging time.
  4. Testing : Every engine is full-load tested to ensure proper engine performance.
  5. Over 80 Years of Engine Manufacturing Experience : Over 80 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

      Technical Specifications

      Basic Introduction of Caterpillar C7-153 Well Service Engine

      Engine Model:C7-153
      Engine Type:Inline 6, 4-Stroke-Cycle Diesel
      Displacement:7.2 L
      Rated Speed:2200 – 2500 RPM
      Aspiration Method:Turbocharged Aftercooled (TA)
      Emission Standard:UN ECE R96 Stage IIIA
      Bore*Storke:110 mm (4.3 in) * 127 mm (5 in)
      Packing Size(L*W*H):1113 mm * 851 mm * 1113 mm
      Weight , Net Dry:712 kg (1570 lb)
      Lead Time:15-30 Working Days
      Payment Terms:T/T ,L/C
      CAT-C7.1E-Industrial-Engine-788X376

      Engine Model

      Rated Power

      Aspiration

      Emissions

      C7.1E205 bkW(275 BHP)@  2500 RPMTurbocharged Aftercooled (TA)Brazil MAR-1, UN ECE R96 Stage IIIA
      C7.1M162 bkW(217 BHP)@ 2200 RPMTurbocharged Aftercooled (TA)China Nonroad Stage III, UN ECE R96 Stage IIIA
      —-End—-

      General Engine Specifications of CAT C7.1E Industrial Engine

      Engine ConfigurationIn-Line 6, 4-Stroke-Cycle DieselBore105 mm (4.1 in)
      Stroke135 mm (5.3 in) Displacement7.01 L (427.7 in³)
      AspirationTurbocharged Aftercooled (TA)Rotation From Flywheel EndCounterclockwise
      Length929 mm (36.6 in) Width668 mm (26.3 in)
      Height817 mm (32.2 in)Weight506 kg (1115 lb)
      —-End—-

      Engine Performance Data Rated Power of CAT C7.1E Industrial Engine

      Maximum Power205 bkW (275 BHP)Maximum Torque1050 N.m @ 1400 RPM(774 lb-ft @ 1400 RPM)
      Rated Speed2200-2500 RPM Minimum Power116 bkW (155.6 BHP)
      EmissionsChina Nonroad Stage III, Brazil MAR-1, UN ECE R96 Stage IIIAAspirationTurbocharged Aftercooled (TA)
      —-End—-

      System of CAT C7.1E Industrial Diesel Engine

      Control SystemFull Electronic Control System, All Connectors and Wiring Looms WaterproofCooling SystemTop Tank Temperature 108 °C (226 °F) As Standard to Minimize Cooling Pack Size
      Designed to Withstand Harsh Offhighway Environments50:50 Water Glycol Mix, Detailed Guidance on Cooling System Design
      Flexible and Configurable Software FeaturesValidation Available to Ensure Machine Reliability
      Well Supported Sae J1939 Can Bus Enables Highly Integrated Machines
      Exhaust SystemDiesel Particulate Filter and Regeneration System Supplied, with a Range of Inlet and Outlet OptionsLube SystemWide Choice of Sumps for Different Applications
      Fuel SystemElectronic High Pressure Common Rail
      Acerttm Technology, Innovative Filter Design to Ensure Maximum Protection of the Engine
      —-End—-

      Standard of CAT C7.1E Industrial Engine

      Fuel System1. Fuel Transfer PumpExhuast System1. Exhuast Manifold
      2. High-Pressure Fuel Pump2. Turbocharger
      3. Fuel Filter3. Exhuast Elbow
      Air Intake System1. Air Intake ManifoldStarting System1. Starter Motor
      2. N/A2. Starter Rely
      Cooling System1. Water PumpPower Output System1. Flywheel
      2. Engine Fan2. Standard Flywheel Housing
      3. Standard Radiator3. N/A
      Lubricating System1. Oil PumpCharging System1. Charging Alternator
      2. Oil Filter2. N/A
      Engine Shut-Down System1. Engine Fuel Shut-Off SolenoidrEngine Mounting System1. Engine Mouting Bracket
      Engine Auiliary Accessories1. Air Compressor
      ——END——

      Optional Accessories of CAT C7.1E Industrial Engine

      Air Intake System1. Air Intake Pre-HeaterExhuast System1. Muffler & Bellows
      2. Air Intake Shut-Off Valve2. Flame Trap
      3. Air Filter3. Spark Arrestor Type Muffler & Bellows
      4. Air Intake Pre-Filter4. Dpf System
      5. Air Filter Alarm System5. N/A
      Fuel System1. Coarse FilterLubricating System1. Oil Pre-Heater.
      2. Fuel Pre-Heater2. N/A
      Starting System1. Manual Magnetic Dc ContactorCooling System1. Silent Type Radiator
      2. Dual Ears Flywheel Housing2. Plateau Radiator
      3. Spring Starter Motor3. Salt-Spray Resistant Radiator
      4. Air Starter Motor4. Coolant Pre-Heater
      5. Hydraulic Starter Motor5. Jacket Water Heater
      6. Manual Magnetic Dc Contactor6. N/A
      Engine Auiliary Accessories1. Hydraulic Oil PumpControl System1. Can Add Engine Monitoring System, Contro System With Wiring Harness.
      2. Air Conditioner Compressor2. Can Add Self-Protection System that Integrated with Alarm System.
      Power Output System1. ClutchEngine Mounting System1. Shock Absorber Pad
      ——END——

      Modifiable Components of CAT C7.1E Industrial Engine

      Air Intake System1. Installation Position of Air FilterCharging System1. 12 V Charging Alternator for 12 V Electric System
      2. Upgrade to Heavy-Duty Type Air Fitler2. Explosion-Proof Charging Alternator
      3. N/A3. Upgrading to Specified Brand and Speicifications of Charging Alternator
      Exhuast System1. Water-Cooled Exhuast ManifoldLubricating System1. Oil Pan Position
      2. Water-Cooled Turbocharger2. Number of Dipstick
      3. Can Modify Installation Position and Direction of Turbocharger3. Position of Dipstick Can Choose from 6 Positions
      4. N/A4. Can Modify Oil Filter to be Remote Installation
      Engine Shut-Down System1. 12 V Solenoid for 12 V Electric SystemStarting System1. Upgrading to Specified Brand and Speicifications of Starter Motor
      2. Explosion-Proof Solenoid2. 12 V Starter Motor for 12 V Electric System
      Fuel System1. Upgrade to Fuel Fitler that Integrated with Fuel Transfer Pump and Fuel Pre-HearterEngine Auiliary Accessories1. All of auxiliary System can Choose Specified Brands and Specifications
      2. N/A2. Additional Auxiliary Systems Can be Added for Special Applications
      Cooling System1. Can Modify Engine fan Into Blower Fan or Suction FanPower Output System1. Can Modify Size of Flywheel Housing and Flywheel
      2. Can Modify Central Position of Engine Cooling Fan2. Dual-Ear Flywheel Housing (For Twin-Starter System)
      3. Can Choose Type of Engine Fan From Mechanical Type or Electric Type3. Some of Models can Modify Flywheel Housing Into PTO Integrated Type
      4. N/A4. Engine Have Connecting Port of PTOs, That Able to Provide Power Output
      Engine Mounting System1. Can Modify Engine Mouting Bracket
      ——END——

      Note: All Above Data are Just for Referenece, All Data Might Change Without Notices or Update, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

      WhatsApp Online logo

      Sales Team


      Marine Sales - Mrs. Gazit Wong WhatApp-Icon

      Train Sales - Mrs. Gazit Wong WhatApp-Icon

      Automotive Sales - Mr. Wells Luo WhatApp-Icon

      Industrial Sales - Mrs. Kitty Chen WhatApp-Icon

      Generator Sales - Mrs. Erica WhatApp-Icon

      Pump Sales - Mrs. Ryen WhatApp-Icon

      Spare Parts - Mrs. Nora Chen WhatApp-Icon

      Sales Manager - Mrs. Wendy Fu

      Ventas españolas - Victoria

      Sales Director - Mr. Jasper Lee       WhatApp-Icon

      Contact EMAC Now!

      3 + 7 =

      Subscribe To Our Newsletter

      Subscribe To Our Newsletter

      Subscribe to get the latest updates from www.caterpillar-engine.com

      Welcome on board, we will keep you updated with latest news and business activities!

      Pin It on Pinterest